Direct-to-Film (DTF) printing delivers vibrant color, great detail, and long-lasting results on apparel. To make sure your design prints beautifully, please follow the guidelines below.

Image Quality & Resolution

Design at 300 DPI
Set your file to 300 DPI at final print size from the start. Increasing the resolution of a low-quality image later won’t improve clarity.

Use High-Resolution Images
DTF works especially well for detailed artwork and photography. The higher the image resolution, the sharper and more vibrant your final print will be.

Transparency & Edges

Avoid Semi-Transparent Elements
DTF printing uses a white underbase, which requires solid artwork. Elements with reduced opacity may not print correctly, so please use fully opaque colors.

Use Halftones for Fade Effects
If you'd like a faded or gradient look, halftoning is the best solution. It uses small solid dots to create smooth transitions while maintaining print quality.

Stick to Clean, Hard Edges
Soft glows, feathered edges, and subtle fades can create rough or uneven results. Crisp, defined edges will produce the cleanest finish.

Durability & Print Feel

Minimum Line Thickness
Avoid very thin lines. In most design programs, lines should be at least 1 pt (Illustrator) or 4 pixels at 300 DPI (Photoshop) at final size. Thinner details may not print cleanly or hold up over time.

Text Size
Fonts should be at least 12 pt at final print size. If your design includes small text, adding a solid background behind it can help improve adhesion and longevity.

Improve Softness & Flexibility
Large solid areas of ink can feel heavier on the garment. Incorporating negative space or see-through elements can help keep the print softer and more breathable.

What to Expect from DTF Prints

White Underbase
Because DTF uses a white base layer beneath the design, you may notice a slight white edge in some areas. This is completely normal.

Print Feel
DTF prints may feel slightly firm at first. After a few washes, the design will soften while remaining durable.

Care Instructions
Wash garments in cold water and avoid high heat. Always iron inside out. Direct heat on the design may cause discoloration, especially in white areas.

Fabric Marks
On polyester garments, light press marks may appear due to heat application. On cotton garments, steam marks typically fade once exposed to air or moisture.